1. Cleans the fuel system perfectly.
2. Removes water and sludge particles on injectors and its nozzles.
3. High mileage: 3-7% of fuel saving.
4. Fights fuel line freeze by removing water.
5. 19.7% of decreased exhaust fumes.
6. Decreases noises from old engines wonderfully.
PROSHOT is an amazing fuel system cleaner using high-quality dispersants. It efficiently cleans the fuel injector, its injection pump and all intake system, and also removes water from the fuel intake system. PROSHOT is able to clean fuel injectors up to 99%; 90-99% of carbon deposit and sludge on the intake valve can be removed, resulting in more than 5% of fuel-saving and vapor corrosion inhibition. Newly manufactured vehicles with recent computer-controlled fuel systems are designed to save more fuel consumption and are more likely to get excessive carbon deposits on valves compared to the old vehicles. This carbon deposit on the intake valve and injector disturbs the balanced ratio between air and fuel, and finally causes incomplete combustion (excessive hazardous fumes). Therefore, many conventional additive factories try to improve the fuel efficiency and detergency by using solvent. However, it occasionally dilates tubes or corrodes sealing surfaces of the system. PROSHOT was designed from understanding the performances of the best fuel additive.
1. 500 ml of PROSHOT per fuel 80 L (21 gallons)
2. Inject one bottle before you fill up.
3. Use one bottle every oil change or 5,000 km.
4. Two consecutive injections is best to optimize the clearance for untreated cars, if the first use is not effective.